Adrian Milea

A navy blue infographic with four numbered cards for recording vocals at home without a treated room. Card one, mic choice, recommends a dynamic mic like the SM7B over a condenser. Card two, gain and noise, covers using a Cloudlifter or Dynamite with 48V and a light touch of noise reduction. Card three, room prep, covers killing noise sources and adding rugs, drapes, and a pop filter. Card four, mic placement, covers distance and the proximity effect. A secret trick box at the bottom describes re-amping an SM7B recording through a Slate VMS emulation.

How to Record Vocals at Home Without a Treated Room

Adrian Milea / music production, recording / October 6, 2026

You do not need a treated room to record a usable vocal at home. Here is the mic, the gain chain, the room prep, and the placement approach that actually works.

How to Record Vocals at Home Without a Treated Room Read More »

Why AI Mastering Sounds Flat (And What Actually Fixes It)

Adrian Milea / mastering, mixing / October 2, 2026

AI mastering sounds flat more often than people expect. Here is the technical reason why, and what a human mastering engineer does differently to protect depth and dynamic range.

Why AI Mastering Sounds Flat (And What Actually Fixes It) Read More »

mastering mixing

A navy blue infographic titled "It's Not Volume. It's Balance." showing a headroom budget comparison. A "Balanced Mix" bar shows a small cyan bass/high-end segment with plenty of room before the white target loudness line, labeled "Reaches target cleanly." An "Imbalanced Mix" bar shows a much larger orange bass/high-end segment that already extends past the target loudness line, labeled "Hits the ceiling before target." Below, a "Why This Happens" card explains that excess bass or high end eats headroom before the limiter starts working, so pushing harder clips those frequencies instead of adding loudness. A "The Fix" card explains that the fix happens in the mix, not the limiter, by building midrange presence between 1 kHz and 5 kHz, with a closing note that a limiter can't rebalance a mix, only make an already-balanced one louder. The footer reads "Save & follow for more mixing + mastering tips" and "adrianmilea.com."

Why Does My Mix Sound Quiet? The Real Reasons and How to Fix Them

Adrian Milea / mastering, mixing / September 29, 2026

A quiet-sounding mix is almost never a volume problem. It is a balance problem, and pushing a limiter harder on an imbalanced mix just makes it distort before it ever gets loud.

Why Does My Mix Sound Quiet? The Real Reasons and How to Fix Them Read More »

mastering mixing

A navy blue infographic titled "Five Plugins Tested vs Real Hardware." A history strip shows four facts: 1976 SSL 4000B (first bus compressor), 1979 E-Series (industry standard), 1980s G-Series (most cloned today), and 83% of 1996's number one hits made on an SSL desk. Below, five plugin rows each show the plugin name, its console basis (G-Series, B-Series, or Native SSL), and a verdict: SSL Bus Compressor 2 and Brainworx bx_townhouse are marked as winners with star icons, while the SSL Stereo Bus Compressor, Waves G-Master Compressor, and Slate Digital VBC FG-Grey are marked "great on tracks, not on the mix bus." A "Key Difference" section explains that all five work well on individual stereo tracks, but only the two winners keep enough stereo space on a mix bus. A settings card shows the winning bx_townhouse settings: 4 dB gain reduction, 4:1 ratio. The footer reads "Save & follow for more mixing + mastering tips" and "adrianmilea.com."

SSL Bus Compressor Plugins Compared: Which One Actually Gets Closest to Hardware?

Adrian Milea / mastering, mixing, music production / September 27, 2026

Five SSL-style bus compressor plugins tested on a simple drum loop against real SSL Bus+ hardware, with a short history of the SSL bus compressor and which plugin actually got closest.

SSL Bus Compressor Plugins Compared: Which One Actually Gets Closest to Hardware? Read More »

mastering mixing music production

A navy blue infographic titled "A More Stable Way to Get Paid," comparing two income models. The Project-Based card lists a new price negotiated every time, income resetting to zero each month, more flexibility with no lock-in, and being best for occasional clients. The Retainer card lists one fixed monthly fee, a predictable income floor, pricing as a discount off the normal rate, and being best for consistent clients. Below, a "Who to Actually Pitch" section shows Good Fit (artists releasing every few weeks, labels with steady schedules, podcasts or creators needing regular work) with a checkmark icon, and Not a Fit (one-time clients, annual bookers, no established pattern) with a minus icon, each with a closing takeaway line. The footer reads "Save & follow for more mixing + mastering tips" and "adrianmilea.com."

Retainer Agreements: A More Stable Way to Get Paid as a Mixing or Mastering Engineer

Adrian Milea / marketing, mastering, mixing / September 25, 2026

A practical guide to retainer agreements for mixing and mastering engineers: what they look like, who to pitch one to, and how they complement project-based pricing instead of replacing it.

Retainer Agreements: A More Stable Way to Get Paid as a Mixing or Mastering Engineer Read More »

marketing mastering mixing

A navy blue infographic titled "Is Your Mix Actually Finished?" showing a 3-step process: Temp Limiter (on the mix bus, for checking only), Gain to -11 LUFS (match the loudest part of the mix to this level), and Compare to Reference (since the reference is already mastered). Below, a "Why This Matters" callout with a star icon explains that comparing an unmastered mix to a mastered reference is not a fair test without loudness matching first. Two cards follow: The Warning Sign (still tweaking after a mix feels finished is usually ear fatigue, with the tip to step away, alternate volume, or check in mono) and The Truth (the same song can be mixed several valid ways, and a finished mix is a decision, not a perfect result). The footer reads "Save & follow for more mixing + mastering tips" and "adrianmilea.com."

When to Stop Mixing: How to Know a Mix Is Actually Finished

Adrian Milea / mixing / September 22, 2026

A real technique for checking whether a mix is ready for mastering, how to tell over-tweaking from an actual problem, and why a finished mix is not what you think it is.

When to Stop Mixing: How to Know a Mix Is Actually Finished Read More »

mixing

A navy blue infographic with four numbered cards reviewing the Rupert Neve Designs 551 Inductor EQ. Card one, the sound, covers how bypass does not inflate loudness and a one dB boost at 35Hz added real kick beefiness. Card two, the test, covers results from a drum loop and an EDM mixbus session. Card three, what is new, covers true mid-side processing and metering added in the plugin version. Card four, the verdict, covers the 129 dollar price, its use as both a mixing and mastering tool, and legacy system support. A golden rule box at the bottom reads listen first, look second, that is the whole philosophy behind a fixed-frequency EQ like this one.

Rupert Neve Designs 551 Inductor EQ Review: Hands-On With the New Plugin

Adrian Milea / review / September 20, 2026

Rupert Neve Designs just released its first plugins under its own name. Here is a hands-on 551 Inductor EQ review, tested on a drum loop and an EDM mixbus.

Rupert Neve Designs 551 Inductor EQ Review: Hands-On With the New Plugin Read More »

review

Author name: Adrian Milea